Isobond® GE 100
Chemical name: Mixture of di- and trifunctional epoxides based on glycidyl glycerol ether
CAS Number: 90529-77-4; 25038-04-4
Isobond® GE 100 is a glycidyl ether used as a rubber to fabric adhesion promoter in pre-dips for the treatment of tyre cord and reinforcing fabric.
Material Definition
Appearance: Viscous, slightly yellowish liquid
Density: Approx. 1.22 g/cm3 @ 25°C
Epoxy Equivalent (WPE): Approx. 140 – 150 g/mol
Viscosity: 160 – 200 mPa.s @ 25°C
Hydrolisiable Chlorine: Max. 0.6 %
Colour No.: Gardener ≤ 1
Refractive Index: 1,476 – 1,482
Application
Isobond® GE 100 is used as a rubber to fabric adhesion promoter in combination with blocked isocyanates (i.e. Kagebond DM-50, Isobond® P, IsoQure® TT). Typical application is as a pre-dip in the double dip process producing polyester tyre cord and reinforcing fabrics.
For details, please refer to Technical Bulletin 03/2003.
Handling, Storage and Packaging
The processing and use of ISOBOND® GE 100 requires adequate technical and professional knowledge. Please consult safety data sheet and observe local safety regulations. The legal requirements prevailing in your country, especially in the avoidance of accidents, working hygiene and patent rights must be observed. Isobond® GE 100 has to be stored in tightly sealed original containers in a cool and dry place. Keep away from strong acids and bases and heavy metals and their salts. Properly stored it is stable for minimum 12 months.
Standard packaging is in drums of 200 kg each or in 1-ton plastic containers.
Regulatory Information
EU REACH registered: Not applicable
Availability
Disclaimer / Conditions
Revision: 2023-07-14 / 854e
We strive to be accurate in all of our documentation. However, any information or advice
is provided by us in good faith, without warranty or unlimited claim of fitness for a specific
application. We sell to qualified industrial users only. The onus is on the product's user
to research carefully and then to continually test the product and its application procedures
within the context of its specific use. Use of our products and data requires diligance and
care, and is within the sole responsibility of the user. Kautschuk-Group does not accept any
liability for damages incurred. Our general
Terms and Conditions apply.
Stated storage and shelf life times are minimum guaranteed values for a period starting on the day of shipment.
After this period has expired, the product requires additional quality control testing but may very well
still be within specification. For more information, refer to our Shelf Life Policy.
For updates on product information, please check this web page regularly:
https://kautschuk.com/products/rubber-fabric/isobond-ge-100