Isodur RFE
Chemical name: Tris(p-isocyanatophenyl) thiophosphate
CAS Number: 4151-51-3
EINECS Number: 223-981-9
Solvent: Ethylacetate
Material Definition
Appearance: Clear yellowish to brown liquid
NCO content of the solution: 7.0 – 7.4 %
Solids: 26.0 – 28.0 %
Application
Isodur RFE is a highly effective crosslinker for adhesives that are based on polyurethane, natural rubber and synthetic rubber (especially chloroprene rubber). It improves heat stability, hydrolysis resistance, and the resistance to greases, oils, and solvents.
Isodur RFE offers an outstanding adhesion promotion for bonding a wide variety of materials such as PVC, rubber, EVA, and leather. This product is especially recommended where the bonds are exposed to considerable forces and stress or heat immediately after application. For instance, it is used for bonding shoe soles, including light-colored shoe materials.
Usage Information
After adding Isodur RFE to a polyurethane- or rubber-based adhesive, the mixture must be used within its pot life. The pot life depends on the polymer content as well as on other ingredients like antioxidants, resins, plasticizers, solvents, etc. This pot life can vary from several hours to one day.
Handling, Storage, and Packaging
The processing and use of Isodur RFE requires adequate technical and professional knowledge. Please consult safety data sheet and observe local safety regulations. The legal requirements prevailing in your country, especially in the avoidance of accidents, working hygiene and patent rights must be observed.
Isodur RFE has to be stored in its sealed original containers at temperatures from 10 to 25°C. Properly stored it is stable for a minimum of six months. If it is stored or transported at low temperatures, crystalline deposits may form but they will re-dissolve at room temperature.
Available pack sizes for Isodur RFE:
Regulatory Information
EU REACH registered: Yes
Availability
Disclaimer / Conditions
Revision: 2023-09-22 / e413
We strive to be accurate in all of our documentation. However, any information or advice
is provided by us in good faith, without warranty or unlimited claim of fitness for a specific
application. We sell to qualified industrial users only. The onus is on the product's user
to research carefully and then to continually test the product and its application procedures
within the context of its specific use. Use of our products and data requires diligance and
care, and is within the sole responsibility of the user. Kautschuk-Group does not accept any
liability for damages incurred. Our general
Terms and Conditions apply.
Stated storage and shelf life times are minimum guaranteed values for a period starting on the day of shipment.
After this period has expired, the product requires additional quality control testing but may very well
still be within specification. For more information, refer to our Shelf Life Policy.
For updates on product information, please check this web page regularly:
https://kautschuk.com/products/adhesives/isodur-rfe