IsoQure® ZnO Active 100
Chemical name: Zinc oxide
CAS Number: 1314-13-2
EINECS Number: 215-222-5
IsoQure® ZnO Active 100 is a high surface area, small-particle active zinc oxide with very good powder flow, suitable for automatic weighing systems. Compared to ordinary zinc oxides, it provides improved dispersion and higher activation efficiency in a wide range of applications, particularly where high specific surface area is required.
Material Definition
Appearance: White to light yellowish powder (fine particles of precipitated zinc oxide)
ZnO content: ≥ 90 %
Lead (Pb2+) content: ≤ 0.001 %
Cadmium (Cd2+) content: ≤ 0.001 %
Iron (Fe2+) content: ≤ 0.005 %
Sieve residue, 325 mesh: ≤ 0.1 %
Specific surface area (BET): Approx. 100 m²/g*
* At the time of manufacture; nitrogen adsorption, BET method.
Application
IsoQure® ZnO Active 100 is designed for use in highly demanding applications where very high zinc oxide surface area and excellent dispersion are required. Typical uses include:
The combination of small primary particle size, dustless powder form and high specific surface area allows efficient activation at reduced zinc oxide dosage levels, while facilitating handling and automated dosing.
Handling, Storage and Packaging
The processing and use of IsoQure® ZnO Active 100 require adequate technical and professional knowledge. Please consult the safety data sheet and observe local safety regulations. The legal requirements prevailing in your country, especially in the avoidance of accidents, industrial hygiene and patent rights, must be observed.
IsoQure® ZnO Active 100 should be stored in tightly sealed original containers in a cool and dry place. When properly stored it remains stable for an extended period; observe the indicated retest date on the label.
Standard pack sizes of IsoQure® ZnO Active 100 are 25 kg, 500 kg and 1000 kg in PP woven bags.
Regulatory Information
Specific national and international regulatory status (e.g. EU REACH, TSCA and food contact status) is available on request and is documented in the corresponding regulatory dossiers and SDS for IsoQure® ZnO Active 100.
Availability
Disclaimer / Conditions
Revision: 2025-11-24 / 15c8
We strive to be accurate in all of our documentation. However, any information or advice
is provided by us in good faith, without warranty or unlimited claim of fitness for a specific
application. We sell to qualified industrial users only. The onus is on the product's user
to research carefully and then to continually test the product and its application procedures
within the context of its specific use. Use of our products and data requires diligance and
care, and is within the sole responsibility of the user. Kautschuk Group does not accept any
liability for damages incurred. Our general
Terms and Conditions apply.
Stated storage and shelf life times are minimum guaranteed values for a period starting on the day of shipment.
After this period has expired, the product requires additional quality control testing but may very well
still be within specification. For more information, refer to our Shelf Life Policy.
For updates on product information, please check this web page regularly:
https://kautschuk.com/products/specialty/isoqure-zno-active-100