Isobond® - C 50
Chemical name: 50 % aqueous dispersion of Kagebond® DM-100, an urethane prepolymer produced by reaction of methylene-bis-(4-phenylisocyanate) with epsilon-caprolactame
CAS Number: 54112-23-1
EINECS Number: 258-981-8
Isobond® C 50 is a non-hazardous aqueous dispersion of a caprolactam-blocked methylene diisocyanate which is used as an adhesion promoter for rubber to textile bonding.
Caprolactam blocked MDI is widely used for the treatment of polyester tyre cord and the treatment of reinforcing fabric for i.e. conveyor belts.
Isobond® C 50 is a new adhesion promoter, made in Germany under a unique solvent-free production process. Isobond® C 50 sets the standard in particle size, stability, and ecological harmlessness.
Application
Isobond® C 50 is used as a technical auxiliary in combination with RFL (resorcinol-formaldehyde-latex) for surface treatment of technical yarns and fabrics. It is extremely efficient for improving the polyester/rubber adhesion in polyester tyre cord and reinforcing fabric in technical rubber products such as conveyor belts, etc.
It can be used in the single dip method as an additive to the RFL-bath or in the double dip method as a pre-dip. Isobond® C 50 is stable at temperatures < 150°C and cured in most applications at 220 - 240°C.
For further information please call our technical service.
Material Definition
Appearance: White liquid dispersion
Molecular Weight: 476.56
Solids: 50/ -2%
Viscosity (flow time) (25°C): 60 sec max. (EN ISO 2431, 4 mm flow cup)
Density: 1,12 g/cm3
Miscibility: In water at any ratio
Handling, Storage and Packaging
Isobond® C 50 is stable for at least one year when stored in sealed original packing at temperatures between 5°C and 30°C without exposure to sunlight. Not frost resisting! Stir up before using!
Standard pack size is in 1 ton plastic containers (Schuetzcontainer); it also can be supplied in 200 kg plastic drums or 22 kg plastic canisters.
Regulatory Information
EU REACH registered: Yes
Availability
Disclaimer / Conditions
Revision: 2023-11-03 / 5543
We strive to be accurate in all of our documentation. However, any information or advice
is provided by us in good faith, without warranty or unlimited claim of fitness for a specific
application. We sell to qualified industrial users only. The onus is on the product's user
to research carefully and then to continually test the product and its application procedures
within the context of its specific use. Use of our products and data requires diligance and
care, and is within the sole responsibility of the user. Kautschuk-Group does not accept any
liability for damages incurred. Our general
Terms and Conditions apply.
Stated storage and shelf life times are minimum guaranteed values for a period starting on the day of shipment.
After this period has expired, the product requires additional quality control testing but may very well
still be within specification. For more information, refer to our Shelf Life Policy.
For updates on product information, please check this web page regularly:
https://kautschuk.com/products/textile/isobond-c50